Construction data lookup · 38/2026/TT-BXD PL-VII
Unit: 1m · Chapter: 17.200
17.20045 is the norm code for "Làm khe co đường lăn, sân", measured in 1m, under 38/2026/TT-BXD PL-VII issued by Bộ Xây dựng — used to estimate material, labor and machinery consumption for cost estimates.
Per the norm set's general notes (see the legal source above).
| Type | Res. code | Resource | Unit | Rate | Grade | Note |
|---|---|---|---|---|---|---|
| Material | — | 10m Thép tròn φ< 25mm | kg | 52.824 | — | — |
| Material | — | đỗ sân bay, khe 1x4, h=30cm Thép tròn φ6÷8mm | kg | 54.129 | — | — |
| Material | — | Que hàn | kg | 0.19 | — | — |
| Material | — | Nhựa đường | kg | 1.038 | — |
Construction data lookup · 38/2026/TT-BXD PL-VII
Unit: 1m · Chapter: 17.200
17.20045 is the norm code for "Làm khe co đường lăn, sân", measured in 1m, under 38/2026/TT-BXD PL-VII issued by Bộ Xây dựng — used to estimate material, labor and machinery consumption for cost estimates.
Per the norm set's general notes (see the legal source above).
| Type | Res. code | Resource | Unit | Rate | Grade | Note |
|---|---|---|---|---|---|---|
| Material | — | 10m Thép tròn φ< 25mm | kg | 52.824 | — | — |
| Material | — | đỗ sân bay, khe 1x4, h=30cm Thép tròn φ6÷8mm | kg | 54.129 | — | — |
| Material | — | Que hàn | kg | 0.19 | — | — |
| Material | — | Nhựa đường | kg | 1.038 | — |
| — |
| Material | — | Dây thép | kg | 1.32 | — | — |
| Material | — | Gỗ xẻ nhóm 4 | m3 | 0.008 | — | — |
| Material | — | Củi đun | kg | 0.9 | — | — |
| — |
| Material | — | Dây thép | kg | 1.32 | — | — |
| Material | — | Gỗ xẻ nhóm 4 | m3 | 0.008 | — | — |
| Material | — | Củi đun | kg | 0.9 | — | — |
